Parts

Anti-vibration Foot Stud Assembly
• 4-3/8-16 Studs
• For use in Compressor and Surgical Tanks
• Includes locking nuts for leveling

• Adec 90.1031.00 or 90-1331-00
• Capacitor for Cascade, Decade, Positioner, Priority, & Performer III Chairs
• With Boot for 100V, 115V, or 240V
• Manufactured by DCI to fit A-dec Chairs

COIL (WATER SOLENOID VALVE) for the DENTSPLY Cavitron® JET with SPS™ – G120, Cavitron® Prophy-JET® Air Polishing System – G122, Cavitron® SPS™ Ultrasonic Scaler – G119. This is a replacement directfit coil to replace the coil only

RPI Part #DSC017
OEM Part for whole assembly 571070002 or 571070003

•24VDC, 3.0 W, 488Ω, 6″ longg wires with 2 pin connector
•Also available: Solenoid Valve Repair Kit (RPI Part #DSK016), Solenoid Valve (Water) (RPI Part #DSV006) and Solenoid Valve (Water) (RPI Part #DSV015)

The Pelton and Crane Chairman Bellows Support Kit is used to support plastic bellows housings that have cracked, or holes no longer support the screws.  This steel bracket allows you to attach it to broken bellows housings and then firmly attach it to the base of the existing chair.  It includes 2 brackets, one for each side, and mounting hardware.

Pelton & Crane Chairman Switch

• Available in Black or White Toggle (Momentary)
• Back (White), Base or Traverse (Black)

• Auto Return (Black) P&C #007899
• Auto Position (Red) P&C #007898
• Wired pre-attached
• Includes 2 wire nuts

Direct replacement for the complete solenoid assembly in Cavitron® JET with SPS™ – G120, Cavitron® SPS™ Ultrasonic Scaler – G119. Can cause problems like water not completely shutting off, water not turning on, sporadic water, etc

RPI Part #DSV006
OEM Part #571070003

SOLENOID VALVE (WATER)

•Ports: 1/8″ FPT; 2 way; N.C.
•24VDC, 60Hz., 3.0 W; 6″ lg. wires with 2 pin connector
•Material: Stainless steel body; Viton seals
•Includes: (1 pc) Polyflo Fitting (1/4″ Tube x 1/8″ MPT) (RPI Part #RPF913) and (1 pc) Adaptor (1/16″ Barb x 1/8″ MPT) (RPI Part #RPF914)
•Also available: Solenoid Valve Repair Kit (RPI Part #DSK016), Coil (Solenoid Valve) (RPI Part #DSC017) and Double Ended Spanner Wrench (RPI Part #RPT501)

Direct replacement filter for your Cavitron® JET Plus™ – G132, Cavitron® JET with SPS™ – G120, Cavitron® Prophy-JET® Air Polishing System – G122, this includes: the plastic housing, filter element, duckbill (check valve) and O-ring (RPI Part #RPO304)
•Clear plastic housing with 1/16″ barbs, Hex body design for easy replacement of internal parts
•With the RPI Duckbill Filter Assembly, only the Filter and Duckbill needs replacement, not the entire Assembly – It’s the RPI Advantage!
•Also available: Repair Kit (Duckbill Filter Assembly) (RPI Part # DSK018)

Replacement for the Kavo Enviroment Chair (KCH-100) hanger that is no longer available.  Direct replacement with a new DCI actuator installed.  Made from 645 Nylon.

2 Piece Lens Shields to fit Pelton & Crane LFII and LFIII lights

These Bulbe are Special to the LFIII because they are slightly smaller than the LFII bulbs making them easier to put in.

• A-dec 61.2065.00 or 61-2065-00
• Limit Switch
• Back-Up Function A-Dec 1040
• Manufactured by DCI to fit A-dec

A-dec 044.183.00 or 044-183-00
• Limit Switch, Chair Stop Function for Cascade 1040 Decade 1021 after 6/98, and Performer 1 and 2
• Manufactured by DCI for A-dec Chairs

Instead of just replacing the Duckbill filter, use this easy to use repair kit to replace the pertinent components in Cavitron® JET Plus™ – G132, Cavitron® JET with SPS™ – G120, Cavitron® Prophy-JET® Air Polishing System – G122 Duckbill Filter Systems. Simply unscrew the filter housing, unscrew the filter, replace the duckbill and oring, and reassemble in reverse instructions. It is that simple.

RPI Part #DSK018
OEM Part #60367 (complete assembly)

REPAIR KIT (DUCKBILL FILTER ASSEMBLY)

•Includes: Filter element, duckbill (check valve) and O-ring (RPI Part #RPO304)
•Also available: Duckbill Filter Assembly (RPI Part #DSA002)

Lever or Rotary Saliva Ejector Valves, Levers, & Tips

Available in Black or Beige

Tip available also in Gray

Trap are 72 pcs/bag

SOLENOID VALVE REPAIR KIT for OEM #571070002 and #571070003 Fits the Water Chassis
Model This Part Fits: Cavitron® JET with SPS™ – G120, Cavitron® SPS™ Ultrasonic Scaler – G119

RPI Part #DSV006
OEM Part #571070002 or #571070002 (Complete Solenoid only)

Includes: Plunger with spring and O-ring
• Also available: Coil (Solenoid Valve) (RPI Part #DSC017), Solenoid Valve (Water) (RPI Part #DSV006), Solenoid Valve (Water) (RPI Part #DSV015) and Double Ended Spanner Wrench (RPI Part #RPT501)

Are you tired of your steam sterilizer ruining your cabinetry. This has been a problem with Tuttnauers for ages. However, our custom made steam vent kit is made to direct steam out from under cabinets to help prevent damage to overhead cabinetry.  (Please note, this will move the majority of steam forward by up to 9″.)  It will fit the standard size Tuttnauer hole on 1730M, 1730MK, 2340M, 2340MK, 2340E, 2340EA, 2540M, 2540MK, 2540E, 2540EA, and EZ9, EZ10, and EZ11 series. Other models include the OCM and OCR by Pelton & Crane which we can easily custom make for you for the same price. Just include the unit type in the comments section and we will adjust accordingly.